Welcome to the website of Shenzhen Shunjie Industrial Technology Co., Ltd

Filter equipment manufacturerHumanized design / Energy saving and emission
reduction / Stable performance / Convenient use

  • Service
    Hotline

    +86-138 2324 9219

  • Hotline

    Mr. Ling

    +86-138 2324 9219

    Miss Zhong

    +86-189 2650 0289

    Mr. Lin

    +86-138 2520 1195

    Mobile website

    Mobile website

    Mobile website

    Mini Program

    Mini Program

    Mini Program

    Official account

    Official account

    Official account

    Personal WeChat

    Personal WeChat

    Personal WeChat

    Back to top

    Everyone is searching for: Everyone is searching for: PP filter、 Bag filter、 PPH filter、
    Return to List

    Analysis of common faults in sludge pumps and solutions

    Article source: Faq Publication time:2024-05-20

    Analysis of common faults in sludge pumps and solutions:
    1. The motor can start, but the movable pressure plate is compressed and there is no action during the return journey.
    The reasons why the movable pressure plate cannot be pressed or pulled open include a decrease in hydraulic cylinder oil level, insufficient oil volume, damaged plunger oil pump, malfunction of electromagnetic directional valve, malfunction of overflow valve, and dirty oil.
    The solution is to check the hydraulic cylinder and add oil if the oil level is insufficient. Start the motor and measure the current to diagnose whether the oil pump is loaded. If the oil pump is unloaded, replace it. Install the oil pump so that there is no air leakage at the inlet and no liquid leakage at the outlet. Start the motor and press the pressing button on the pressure plate to check if the indicator light on the coil is displaying normally. Clean the valve body and replace it if it is abnormal. First, twist open the front end cover of the high and low pressure relief valves, jog the motor to start the oil pump for flushing, and then check if the spring is loose. If it is loose, replace the spring. The valve body of the high and low relief valves can be used for a long time, and the failure rate is extremely low. Observing the dark color and low viscosity of the oil, it needs to be replaced. The hydraulic oil in the oil tank of a normally running plate and frame filter press should be replaced once a year.
    2. Insufficient clamping force on the movable pressure plate of the sludge pump
    The clamping force of the movable pressure plate is controlled by the electric contact pressure gauge. If the clamping force of the movable pressure plate is insufficient, the pressure adjustment of the electric contact pressure gauge is improper, the high-pressure liquid flow valve is not adjusted properly, the oil circuit of each valve leaks seriously, and the oil is dirty and blocks the valve body.
    The solution is to readjust the electric contact pressure gauge and high-pressure liquid flow valve, first twist open the front end cover of the high and low pressure relief valves, jog the motor to start the oil pump for flushing, check the oil circuit leakage of each valve, and replace the sealing interface gasket. The oil is too dirty or needs to be replaced if it has been used for more than a year.
    3. Pressure holding failure
    Pressure holding failure is when the clamping force of the movable pressure plate rises to the upper limit of the electric contact pressure gauge, and the oil pump stops working. During the working process (feeding pressure filtration), if the pressing oil pressure drops to the lower limit value of the electric contact pressure gauge, the system will automatically compensate for failure, and the pressing oil pressure will decrease and feed pressure filtration will leak material.
    The solution is to check for leaks in the oil circuit and piston sealing ring, replace the sealing ring of the hydraulic control one-way valve, and clean the hydraulic control one-way valve body.
    4. Unclear filtrate from sludge pump, poor filtration effect of calcium carbide slurry sprayed between filter plates, and high moisture content of filter cake
    The integrity of the filter plate components is crucial for the normal operation of the filter press. Damaged or leaking filter cloth can make the filtrate turbid, the filter plate is not tightly compressed, there are carbide slag or debris on the surface of the plate, the filter cloth is wrinkled, and the thickness of the filter cloth is uneven, which can cause the jet of carbide slag slurry between the filter plates. The bottom of the filter cloth contains residual carbide slag, and the thickening of the bottom filter cloth can cause a large deviation of the tail. Therefore, maintenance and management of filter plate components can reduce damage to the filter plate, ensure no spraying of carbide slurry and turbid filtrate, and specifically achieve:
    (1) Choose a filter cloth suitable for carbide slag filtration material, which must ensure fracture strength, radial and weft elongation, and breathability.
    (2) The filter cloth should be placed flat, without folding or wrinkling, without any damage or leakage. The edges should extend beyond the filter plate, and the rope should be tied tightly without any deposited carbide residue.
    (3) Regularly clean the filter cloth and make regulations based on usage.
    (4) The feeding port of the filter cloth and the surrounding carbide slag should be cleaned thoroughly to avoid uneven feeding and excessive pressure difference on both sides of the filter plate, which may cause damage.
    (5) Ensure blowing pressure and time.
    Shenzhen Shunjie Industrial Technology Co., Ltd. is located in the coastal city of Shenzhen. Our company focuses on the research, design, manufacturing, and sales of chemical pumps and chemical liquid filters. All along, the company has adhered to years of experience in design and manufacturing, people-oriented, and selected environmentally friendly new materials. Through our excellent team's humanized design, our products have the characteristics of energy conservation, emission reduction, environmental durability, quality assurance, stable performance, and convenient use. The website is www.shunjiepump.com