Welcome to the website of Shenzhen Shunjie Industrial Technology Co., Ltd

Filter equipment manufacturerHumanized design / Energy saving and emission
reduction / Stable performance / Convenient use

  • Service
    Hotline

    +86-138 2324 9219

  • Hotline

    Mr. Ling

    +86-138 2324 9219

    Miss Zhong

    +86-189 2650 0289

    Mr. Lin

    +86-138 2520 1195

    Mobile website

    Mobile website

    Mobile website

    Mini Program

    Mini Program

    Mini Program

    Official account

    Official account

    Official account

    Personal WeChat

    Personal WeChat

    Personal WeChat

    Back to top

    Everyone is searching for: Everyone is searching for: PP filter、 Bag filter、 PPH filter、
    Plastic ink filtration solution
    Plastic ink filtration solution
    Details
    The electric brush type self-cleaning filter is equipped with multiple filtering and cleaning devices. When water enters each filter cartridge from the inlet of the filter, impurities are intercepted on the inner wall of the filter cartridge. The filtered clean water flows out from the outlet. When the impurities accumulate on the inner wall of the filter cartridge, the pressure difference between the inlet and outlet reaches the preset value or reaches the cleaning time or is manually prefabricated, the filter will start the self-cleaning process.

    The structure and working principle of electric brush type self-cleaning filter The electric brush type self-cleaning filter is an advanced and easy to operate fully automatic self-cleaning filter, which uses high-strength stainless steel wedge mesh, has the characteristics of large processing capacity, long service life, and high cleaning efficiency. This machine adopts intelligent pressure difference control and timed control to automatically clean the filter screen. When the pressure difference between the inlet and outlet of the filter reaches the set value or the timer reaches the set time, the electric control box sends a signal to drive the motor to rotate, and at the same time, the drain valve opens. The impurities and particles adsorbed on the filter screen are brushed by a rotating cleaning brush and discharged from the drain valve with water flow. When the pressure difference between the inlet and outlet of the filter returns to normal or the timer setting time ends, the motor stops rotating and the electric drain valve closes. Throughout the process, the material flow was not interrupted, achieving continuous and automated production.