Filtering solutions for the pharmaceutical industry
Details
The high-efficiency stainless steel filter cartridge for pharmaceutical and biological liquids is a product that separates solid particles and impurities from the fluid, improves product purity, and protects equipment (such as compactors, pumps, surfaces, etc.) for safe operation. Among them, the high-efficiency stainless steel filter cartridge for pharmaceutical and biological liquids is a multi-purpose filtering equipment with a novel structure, small volume, simple and flexible operation, energy saving, closed operation, and strong applicability. In the pharmaceutical industry, it is mainly used for materials with hygiene requirements in pharmaceutical production, such as syrup pharmaceutical products.
High efficiency filters are primarily used to capture particles, dust, and various suspended solids above 0.5um, serving as the final filter for various filtration systems. Select ultra-fine fiberglass paper as filter material, fold laminated paper, aluminum foil board and other materials as cutting plates, seal with new polyurethane sealant, and make the outer frame of galvanized sheet, stainless steel sheet, and aluminum alloy profile.
High efficiency air filters are primarily used to capture particulate dust and various suspended solids above 0.5um. The air purifier mainly consists of a filter element and a housing. The basic requirements are high filtering power, low activity resistance, and the ability to continuously use for a long time to reduce the cost of later consumables.
The filter element refers to the air filter, and high-efficiency air filters play a crucial role in the air purification industry.
The leak detection of filters can not only detect any leakage, but also understand the service life of the filters. Some manufacturers have stated that if the air supply volume drops to 70% and there are air leaks, it is necessary to replace the filter in a timely manner; If any abnormalities are found during the verification of the air conditioning purification system, it is also necessary to replace the equipment in a timely manner; If the pressure difference is not qualified and the air supply cannot be felt, the cause should be analyzed in a timely manner. If it is a problem with the filter, a new filter should be installed.
Some manufacturers advocate for pharmaceutical companies to conduct leak testing on filters at least once a year. If there is a problem, it should be promptly plugged or replaced with equipment, and if the filter is repaired or replaced, a leak test should be conducted. As long as these tasks are done well, we can ensure that the filters play their true equipment value, ensure the cleanliness of pharmaceutical production, and ensure the efficacy of pharmaceutical products. In addition, pharmaceutical companies should also attach importance to the leak detection test of filters, draft documents on the replacement cycle of equipment, and ensure a clean pharmaceutical production environment.
Mainly divided into: high-efficiency filters with partitions, high-efficiency filters without partitions, V-BED high-efficiency filters, and high-temperature resistant high-efficiency filters.
Non partition high-efficiency filter
A non partition filter uses hot melt adhesive to replace aluminum foil with a partition filter to separate the filter material. Because there is no partition, the 50mm thick non partition filter can achieve the performance of a 150mm thick partition filter. The HEPA with a 90mm thick outer frame can achieve an air volume of 1.3 times that of the standard resistance type with a partition p 150mm thick and twice that of the standard resistance type with a partition p 150mm thick, under the same filtering area and filtering power. Capable of meeting the stringent demands of various space, weight, and energy consumption for air purification today.
High efficiency filter with partition
A high-efficiency filter with a partition is made by using ultra-fine fibers as filter material, high-quality kraft paper for hot rolling forming, or selecting offset paper and aluminum platinum as partition plates, and gluing them with wooden or aluminum alloy frames. It has the advantages of high filtration power, low resistance, and large air volume. High efficiency filters with partitions often use double-sided adhesive coated copperplate paper as the partition board, with the intention of preventing the partition board from being shortened due to the influence of cold, hot, dry, and wet conditions, and then emitting particles. Suitable for low-level non unidirectional flow projects and various purification equipment and clean workshops. Among the partition filters, aluminum partition filters are mainly used in high temperature or high humidity environments, while paper partition filters are used in ordinary clean environments. The partition has a relatively large air volume and can be used for high-temperature filtration.
V-shaped pleated filter
Used for general ventilation systems, it has the characteristics of large filtration area, low resistance, and long service life. It can be used as a pre filter for high-efficiency filters, and effectively extend the service life of high-efficiency filters.
High temperature resistant and high-efficiency filter
This filter can be used in high temperature environments of 250 ℃, with a filtration power of 99.99% @ 0.3 μ M
D O. P./P.S.L. Testing 95%, 99.99% at 0.3 μ M
In the pharmaceutical industry, various antibiotics and other medicinal liquids are used as pre filters for food and beverage, alcohol, mineral water, and drinking water With the advancement of membrane production technology, filter cartridges using membranes as filtration media have been widely used for precision filtration and ultrafiltration.