Welcome to the website of Shenzhen Shunjie Industrial Technology Co., Ltd

Filter equipment manufacturerHumanized design / Energy saving and emission
reduction / Stable performance / Convenient use

  • Service
    Hotline

    +86-138 2324 9219

  • Hotline

    Mr. Ling

    +86-138 2324 9219

    Miss Zhong

    +86-189 2650 0289

    Mr. Lin

    +86-138 2520 1195

    Mobile website

    Mobile website

    Mobile website

    Mini Program

    Mini Program

    Mini Program

    Official account

    Official account

    Official account

    Personal WeChat

    Personal WeChat

    Personal WeChat

    Back to top

    Everyone is searching for: Everyone is searching for: PP filter、 Bag filter、 PPH filter、
    Return to List

    What is the composition of a PP filter bag filter?

    Article source: Information Publication time:2024-05-20

    A filter is an essential device on the conveying medium pipeline. Usually installed on the inlet side of equipment such as pressure reducing valves, relief valves, fixed water level valves, and rework filters. The filter consists of a cylinder, a stainless steel filter, a sewage treatment section, a transmission device, and an electrical control section. After the water to be treated passes through the filter cartridge of the filter, its impurities are blocked. When cleaning is required, only removable filter cartridges can be removed and reinstalled after processing. Therefore, it is extremely convenient to use and maintain.
    PP filter bag filter can filter, purify, separate, and recover liquids. It is a professional filtering equipment, so what are its components? Here is a brief introduction to everyone.
    1. The bag filter mainly consists of three parts in the manufacturing process, namely filter bag, filter container, and support net basket. When the bag filter filters liquid during use, the liquid will flow out from the side of the filter container. Or enter the liquid inlet below.
    2. As the filter bag supported by the net basket has been loaded into the filter bag, during use, due to the impact of liquid and uniform pressure surface, the filter bag will expand, which will cause the liquid material in the entire filter bag to deteriorate. The surface is evenly distributed, and the liquid passing through the filter bag is discharged from the outlet at the bottom of the filter along the wall of the metal support basket.
    During use, filtered particles and impurities will be trapped in the filter bag, and the filtration process can be completed during use. In order to maintain the efficiency, smoothness, and filtration accuracy of the filter, and ensure that the downstream liquid is not contaminated, it should be closed after running for a period of time, the filter end cover should be opened, and the residual material and filter bag should be removed together. For a new filter bag, the replacement time depends on the actual situation.
    During the operation, a certain porous medium can be used to separate the suspension. During the working process, under the action of external forces, the liquid in the suspension will flow out through the pores of the medium, allowing solid particles to be retained, which will achieve separation to a certain extent. Usually, the suspension to be filtered is called a filter slurry. The porous medium used is called a filtering medium. The liquid passing through the medium pores is called filtrate. The intercepted solid is called filter cake or filter residue.