Welcome to the website of Shenzhen Shunjie Industrial Technology Co., Ltd

Filter equipment manufacturerHumanized design / Energy saving and emission
reduction / Stable performance / Convenient use

  • Service
    Hotline

    +86-138 2324 9219

  • Hotline

    Mr. Ling

    +86-138 2324 9219

    Miss Zhong

    +86-189 2650 0289

    Mr. Lin

    +86-138 2520 1195

    Mobile website

    Mobile website

    Mobile website

    Mini Program

    Mini Program

    Mini Program

    Official account

    Official account

    Official account

    Personal WeChat

    Personal WeChat

    Personal WeChat

    Back to top

    Everyone is searching for: Everyone is searching for: PP filter、 Bag filter、 PPH filter、
    Filtering solutions in the energy sector
    Filtering solutions in the energy sector
    Details
    The automatic cleaning filter is composed of main components such as main pipe assembly, end cover assembly, fine filter element assembly, coarse filter element assembly, suction device assembly, hydraulic motor, hydraulic cylinder assembly, discharge valve, pipeline control system, etc. Water enters the filter through the inlet, first passing through the coarse filter element component to remove impurities from the trap particles, and then reaching the fine filter screen. After filtering out the impurities of small particles through the fine filter screen, clean water is discharged from the outlet.
    Fully automatic self-cleaning filter
    During the filtration process of the automatic cleaning filter, impurities in the inner layer of the fine filter gradually accumulate, forming a pressure difference on both sides of it. When the pressure difference reaches the preset value, the automatic cleaning process will begin: the drain valve opens, the hydraulic motor chamber (suction chamber) and hydraulic cylinder of the main component release pressure and discharge water; The pressure inside the hydraulic motor computer and the suction pipe drops significantly. Due to negative pressure, the dirt on the inner wall of the fine filter screen is sucked through the nozzle, and flows into the hydraulic motor room through the hydraulic motor. It is discharged by the discharge valve, forming a suction process.
    When the water flows through the hydraulic motor, it drives the suction pipe to rotate, and the hydraulic piston of the hydraulic cylinder drives the suction pipe to move axially. The suction component completely cleans the entire inner surface of the filter through the combination of axial and rotational movements. The entire cleaning process will last for tens of seconds. The drain valve is closed at the end of cleaning, and the increased water pressure will cause the hydraulic cylinder piston to return to its initial position. The automatic cleaning filter begins to prepare for the next flushing cycle. During the cleaning process, the filter operates continuously without interruption.